Usl JSD-100 Instalační manuál stáhnout pdf (Strana 41)

SX-2000 Installation Manual

11/8/2010

GDC Technology Ltd. Page 40 of 42

3. Enter the IP address of the USL JSD device (see Figure 47).

4. Select the correct model (JSD-80 or JSD-100) of the device the server is connected to.

5. Click the [Save] button to save configured settings.

Figure 46 USL JSD automation device setup

Figure 47 Automation settings for USL JSD device

3.3.12 Component Engineering TA-10 Setup

The Component Engineering TA-10 can be used for theater automation with the SX-2000 server.

It requires that the TA-10 be wired in a particular configuration. A wiring diagram can be seen in

Figure 48.

The TA-10 is connected to the SX-2000 server using the server’s GPIO input/output port.

Configure event labels with the GPIO device to trigger the TA-10.

1 2 ... 36 37 38 39 40 41 42

Žádné komentáře

Usl JSD-100 Instalační manuál Strana 41